User's Manual

● Parts Needed For ●
Roof Beam//Braces
Step 13
SP26
● ●
● ●
● Main Roof Beam Assembly (1)
●●
●●
● Single Roof Beam Assemblies (2)
●●
●●
● 9204 Roof Beam Brace (2)
26
1 Wrap the weather stripping tape
around the two joined edges of the
large left and right gables. See dia-
gram. Cut the weather stripping to
length and repeat on next gable set.
2 Spread the two halves of the double
roof beam and fasten to the gable
brace of the front gable.
STEP
6
STEP
2
Roof Beam Brace 9204
STEP
7
Roof Beam (Single)
STEP
5
STEP
4
STEP
3
Spread Two Halves
Of Roof Beams
STEP
1
Weather Stripping
Roof Beam (Double)
Roof Beam Brace 9204
3 Fasten the other end of the double
roof beam to the gable brace of the
rear gable.
4 Fasten the single roof beams,
small holes on top, as shown using
bolts and nuts.
5 Fasten a roof beam brace to the
double roof beam behind the front
gable by placing the tab on the end of
the brace between the roof beams.
Align the tab with the fourth hole and
fasten the brace with a bolt and nut.
6 Fasten the lower end of the roof
beam brace to the track support with
a bolt and nut.
7 Fasten a roof beam brace be-
tween the rear gable and the roof
beam at the third hole, as shown.