User's Manual

●●
●●
● Door Track Assembly (1)
●●
●●
● Rear Wall Angle Assembly (1)
●●
●●
● Side Wall Angle Assembly (2)
● Parts Needed For ●
Top Frames
Step 8
SO21
21
The top frame pieces give rigidity to
the walls and provide a surface for
attaching the gables which support
the roof.
1 Fasten the rear wall angle across
the inside top of the rear wall using
screws.
2 Fasten the side wall angles across
the inside top of the side panels us-
ing screws. Side wall angles must
overlap rear wall angle in corners.
3 Fasten the door track assembly
(holes on top) across the top of the
front wall panels using screws. See
the figure.
STEP
1
3
STEP
9366
5986
FRONT
2
STEP
10391
Long Leg
on Top
Opening
facing in
Short Leg
on Bottom
Wall Angles
Must Face
Inside
Building
DOOR TRACK ASSEMBLY