User's Manual

1 Attach the right and left side roof
trim to the lower end of the roof pan-
els on each side of the building using
screws at each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2 Using your thumb and index fin-
ger, overbend the bottom flange of
the side roof trim at the corner inward
enough so the right and left roof trim
caps fit onto right and left corners.
3 Fasten the roof trim caps to the
side trim using a screw.
4 Fasten the roof panel ribs, peak
caps and ridge caps together using
bolts and nuts.
●●
●●
● 8485 Left Side Roof Trim (2)
●●
●●
● 8836 Right Side Roof Trim (2)
Step 16
D29
● Parts Needed For ●
Roof Trim
STEP
1
8836
STEP
Peak Cap
Roof Trim
STEP
2
4
8485
8485
8836
Roof Trim Cap
Tuck Flange
Inward to Fit
Inside of
Roof Trim Cap
STEP
3
29