Outdoor Storage User Manual
O Parts Needed For O
Door Assembly
• 3719 Door Handle Brace (2)
• 10489 Hight and Left Doors (2)
• 10497 Horizontal Door Brace (4)
• 9355 Vertical Door Brace (2)
The steps on this page tell how to
assemble the right door. You will
perform exactly the same procedures
for the left door. Each bolt and screw
in the door requires a washer. Pro-
ceed as follows:
1 Attach the door handle brace and
handle to the door with 1 bolt as
shown. Don't tighten the bolt yet.
2 Swing the door handle brace up to
the hole in the center of the door and
insert a screw.
10497 9355
/
3 Hold the vertical door brace
against the center of the inside sur-
face of the door and turn the screw to
hold the vertical door brace and door
handle brace in place. Fasten to
door above and below center
connection using 2 screws.
4 Insert a second bolt in the door
handle and tighten both bolts.
5 Put a horizontal door brace onto
the top edge and bottom edge and
fasten with 1 bolt in the center.
6 Attach the lower door guides and
bolts as shown.
66382
3719
10489 Right Door
/
66045
•3719
66382 _1_ 10489 Left Door
9355
10497
_J
1O497
7 Repeat steps 1 through 6 for the
left door.
3O
END VIEW
SHO_