Outdoor Storage User Manual

Step 9
® Parts Needed For ®
Front Channel/Door Jamb
• 9900 Door Jamb (2)
• 9365 Front Wall Channel (2)
UN22
The door jambs reinforce the door
opening and provide an attractive
trim. Follow these steps for both
doorjambs.
1 Fasten the front wall channels
in their positions between the end of
the side waft channel and the cor-
ner panel using screws. Do not put
INSIDE OF
BUILDING
a screw in the hole at the end be-
hind the door opening at this time.
(2)
2 Fasten a door jamb to the front
panel with two bolts, nuts and acorn
nuts, as shown.
3 Fasten the center of the door
jamb to the front wall panel and the
front wall channel with two screws.
Acorn Nut
\
Front Wall Channel
Hex Nut Cross-Section
",,,,., Top View
9900
Acorn Nut
Screw
4. Fasten the top of the doorjamb to
the door track with two screws. Do
the same for the bottom into frame.
Repeat steps 2 through 4 for the
opposite door jamb.
22
DoorTrack
Screw
Screw