Outdoor Storage User Manual

41
● Parts Needed For ●
Bottom Section Roll-Up-DoorBottom Section Roll-Up-Door
Bottom Section Roll-Up-DoorBottom Section Roll-Up-Door
Bottom Section Roll-Up-Door
Step 29Step 29
Step 29Step 29
Step 29
BW41
●●
●●
●
9286 Door Panel (Bottom) (1) 9286 Door Panel (Bottom) (1)
9286 Door Panel (Bottom) (1) 9286 Door Panel (Bottom) (1)
9286 Door Panel (Bottom) (1)
●●
●●
●
7808 Bottom Angle (1) 7808 Bottom Angle (1)
7808 Bottom Angle (1) 7808 Bottom Angle (1)
7808 Bottom Angle (1)
●●
●●
●
8198 Vinyl Weatherstrip (1) 8198 Vinyl Weatherstrip (1)
8198 Vinyl Weatherstrip (1) 8198 Vinyl Weatherstrip (1)
8198 Vinyl Weatherstrip (1)
STEP
22
22
2
STEP
11
11
1
STEP
33
33
3
11
11
1Layout the
door panels door panels
door panels door panels
door panels on a flat
surface, protecting the panels from
being scratched.
22
22
2Bolt the middle stiles at the center
of the 3 door panels where indicated
with #10-32x3/8" bolts on the outside
and square nuts inside.
33
33
3On the
door panel bottom sec-door panel bottom sec-
door panel bottom sec-door panel bottom sec-
door panel bottom sec-
tion, tion,
tion, tion,
tion, attach the
right bottom brack-right bottom brack-
right bottom brack-right bottom brack-
right bottom brack-
et et
et et
et to the lower right corner and the
leftleft
leftleft
left
bottom bracket bottom bracket
bottom bracket bottom bracket
bottom bracket to the left side using
#10Bx1/2" truss head screws into
end stiles.
44
44
4Loosely install
bottom angle bottom angle
bottom angle bottom angle
bottom angle to the
bottom section using #10-32x3/8"
bolts and square nuts. Insert vinyl
weather strip weather strip
weather strip weather strip
weather strip between angle and
bottom section and tighten bolts.
55
55
5Fasten 2
lift handles lift handles
lift handles lift handles
lift handles to bottom sec-
tion, just below the bottom of middle
stile using 1/4-20x1/2" hex head bolts
and 1/4-20 square nuts.
66
66
6Install the
#1 hinges #1 hinges
#1 hinges #1 hinges
#1 hinges at the upper
corners and to the middle stile of the
bottom section using #10Bx1/2" truss
head screws.
NOTENOTE
NOTENOTE
NOTE
Be sure you fasten the lower part
of hinge to the top of each stile.
The top hinge leaf is marked.
STEP
44
44
4
STEP
66
66
6
STEP
55
55
5