Outdoor Storage User Manual

33
Parts Needed For
Roof Panels 12x10Roof Panels 12x10
Roof Panels 12x10Roof Panels 12x10
Roof Panels 12x10
Step 21Step 21
Step 21Step 21
Step 21
STEP
44
44
4
STEP
33
33
3
BW33
7828 Middle Roof Panel (2) 7828 Middle Roof Panel (2)
7828 Middle Roof Panel (2) 7828 Middle Roof Panel (2)
7828 Middle Roof Panel (2)
11
11
1Position
middle roof panel middle roof panel
middle roof panel middle roof panel
middle roof panel over-
lapping rib of left corner roof panel.
Fasten overlap at center of roof panel
rib using a bolt and nut. Fasten to roof
beams as before using screws.
22
22
2Cut the
weather stripping tapeweather stripping tape
weather stripping tapeweather stripping tape
weather stripping tape
into 4 strips, each strip being about 2"
(5cm) long.
33
33
3Cover the joint at the peak with
weather stripping tape. Unroll the tape
and press it down over the opening at
the ridge as you install each roof
panel. Do not cut the tape at this time.
44
44
4Install a middle roof panel on the
left side of building. At the top roof
beam end of panels, fasten 1st roof
panel rib overlaps with a bolt and nut.
Press 2 strips over the bolt heads.
Save the other 2 strips for the next
overlap. Remember, the crimped rib
is always overlapped by wide rib of
adjacent panel.
STEP
11
11
1