Outdoor Storage User Manual

32
● Parts Needed For ●
CorCor
CorCor
Cor
ner Roof Pner Roof P
ner Roof Pner Roof P
ner Roof P
anels anels
anels anels
anels
All SizAll Siz
All SizAll Siz
All Siz
eses
eses
es
Step 20Step 20
Step 20Step 20
Step 20
STEP
11
11
1
STEP
STEP
22
22
2
33
33
3
BW32
●●
●●
●
7826 Right Roof Panel (2) 7826 Right Roof Panel (2)
7826 Right Roof Panel (2) 7826 Right Roof Panel (2)
7826 Right Roof Panel (2)
●●
●●
●
7827 Left Roof Panel (1) 7827 Left Roof Panel (1)
7827 Left Roof Panel (1) 7827 Left Roof Panel (1)
7827 Left Roof Panel (1)
Installing the roof panels is best done
with a step ladder. Each screw and
bolt in the roof requires a washer.
Support lintel by propping up at cen-
ter with a wood 2x4 until sag is gone
and there are no buckles in gables.
11
11
1Position a
right roof panel right roof panel
right roof panel right roof panel
right roof panel at the
front left corner and fasten to the gable
and roof beams using screws and
bolts as shown. Do not fasten the
lower end of the panels to the side top
angle at this time.
Hint: Hint:
Hint: Hint:
Hint: Follow the fastener sequence
shown, for proper alignment.
22
22
2Install the
left roof panel left roof panel
left roof panel left roof panel
left roof panel for the right
side in the position shown. Remove
lintel support.
33
33
3Temporarily install a second right
roof panel loosely as shown, for re-
moval later. Do not fasten left rear
panel at this time.
NOTENOTE
NOTENOTE
NOTE
If roof beam holes do not line up
with the roof panel holes, shift the
building from left to right.
If this does not help, your building
may not be level. Shim the
corners until holes line up.
FRONTFRONT
FRONTFRONT
FRONT
RIGHT CORNER ROOF PANEL
LEFT CORNER ROOF PANEL