Outdoor Storage User Manual

28
●●
●●
●
Right Gable Assembly (1) Right Gable Assembly (1)
Right Gable Assembly (1) Right Gable Assembly (1)
Right Gable Assembly (1)
●●
●●
●
7833 Roof Beam (4) 7833 Roof Beam (4)
7833 Roof Beam (4) 7833 Roof Beam (4)
7833 Roof Beam (4)
●●
●●
●
Left Gable Assembly (1) Left Gable Assembly (1)
Left Gable Assembly (1) Left Gable Assembly (1)
Left Gable Assembly (1)
●●
●●
●
6382 Center Gable Brace (1) 6382 Center Gable Brace (1)
6382 Center Gable Brace (1) 6382 Center Gable Brace (1)
6382 Center Gable Brace (1)
●●
●●
●
7833 Roof Beam Assembly (1) 7833 Roof Beam Assembly (1)
7833 Roof Beam Assembly (1) 7833 Roof Beam Assembly (1)
7833 Roof Beam Assembly (1)
●●
●●
●
6372 Gable Strut (2) 6372 Gable Strut (2)
6372 Gable Strut (2) 6372 Gable Strut (2)
6372 Gable Strut (2)
● Parts Needed For ●
Roof Beams 12x17, 12x24 & 12x31Roof Beams 12x17, 12x24 & 12x31
Roof Beams 12x17, 12x24 & 12x31Roof Beams 12x17, 12x24 & 12x31
Roof Beams 12x17, 12x24 & 12x31
Step 16Step 16
Step 16Step 16
Step 16
STEP
11
11
1
STEP
STEP
22
22
2
STEP
77
77
7
33
33
3
STEP
55
55
5
BW28
11
11
1Lift and fasten a right gable assem-
bly at top of lintel using bolts & screws.
22
22
2Install single
roof beams 7833 roof beams 7833
roof beams 7833 roof beams 7833
roof beams 7833 to
the gable braces at the front section.
33
33
3Lift and fasten a left gable assem-
bly in the same manner.
44
44
4Join left and right gables together
with a
center gable brace center gable brace
center gable brace center gable brace
center gable brace using 3
bolts and nuts, at middle holes.
55
55
5Apply
weather stripping weather stripping
weather stripping weather stripping
weather stripping along the
mating edge of the left and right gables
as shown. Cut the weather stripping
to length.
66
66
6Install single roof beams to the left
side of building in the same manner.
Slide a
roof beam assembly 7833roof beam assembly 7833
roof beam assembly 7833roof beam assembly 7833
roof beam assembly 7833
over center gable flange and other end
over center gable braces on truss and
fasten using bolts & nuts.
77
77
7Fasten a
gable strut gable strut
gable strut gable strut
gable strut to the middle
roof beam behind the front gable by
placing tab on end of strut between the
roof beams. Align the tab with holes
and fasten strut with 2 bolts.
88
88
8Fasten the lower end of the strut to
center gable flange with 2 bolts.
99
99
9At the truss assembly the gable struts
are attached between the middle roof
beam and center brace.
NOTENOTE
NOTENOTE
NOTE
Do not tighten bolts and nuts
until all struts are assembled.
STEP
88
88
8
STEP
99
99
9
STEP
66
66
6
STEP
44
44
4