Outdoor Storage User Manual

The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
1 1
1 1
1 Fasten
front columns front columns
front columns front columns
front columns to the bot-
tom and mid front frames with bolts
and nuts. Flange with 2 holes at each
end must be facing outside. Fold
front panel slightly away from column
to tighten bolts and nuts.
2 2
2 2
2 Fasten
right right
right right
right and
left front frame left front frame
left front frame left front frame
left front frame
to the top of front wall panels using 4
screws.
3 3
3 3
3 Position
lintel lintel
lintel lintel
lintel across top of frames
and columns and fasten with bolts.
4 4
4 4
4 Position
rear frame assemblyrear frame assembly
rear frame assemblyrear frame assembly
rear frame assembly
across top of main wall panels and
fasten using screws.
Step 10Step 10
Step 10Step 10
Step 10
BW23
● Parts Needed For ●
FramesFrames
FramesFrames
Frames
12x17, 12x24 & 12x31 12x17, 12x24 & 12x31
12x17, 12x24 & 12x31 12x17, 12x24 & 12x31
12x17, 12x24 & 12x31
●●
●●
●
Rear Frame Assembly (1) Rear Frame Assembly (1)
Rear Frame Assembly (1) Rear Frame Assembly (1)
Rear Frame Assembly (1)
●●
●●
●
7915 Side Top Angle (see below) 7915 Side Top Angle (see below)
7915 Side Top Angle (see below) 7915 Side Top Angle (see below)
7915 Side Top Angle (see below)
●●
●●
●
7838 Side Top Angle (2) 7838 Side Top Angle (2)
7838 Side Top Angle (2) 7838 Side Top Angle (2)
7838 Side Top Angle (2)
●●
●●
●
7958 Door Track (1) 7958 Door Track (1)
7958 Door Track (1) 7958 Door Track (1)
7958 Door Track (1)
23
#10-32 Square Nut
STEP
22
22
2
STEP
33
33
3
STEP
11
11
1
5 5
5 5
5 Fasten
side top angles 7915side top angles 7915
side top angles 7915side top angles 7915
side top angles 7915 to
the truss column using a screw and to
rear corner panels using screws.
6 6
6 6
6 Fasten
side top angles 7838side top angles 7838
side top angles 7838side top angles 7838
side top angles 7838
under
7915 7915
7915 7915
7915 and fasten to front corner
panels using screws. Fasten over-
lap (2 1/2" 6cm) with 2 bolts and nuts.
Side angles overlap front and rear
frames in the corners. Fasten sup-
port column to side top angle using a
bolt and nut.
7 7
7 7
7 Position
door trackdoor track
door trackdoor track
door track to the inside of
side top angle, butted up against sup-
port column. With short flange of
track at bottom, fasten angle to track
using 4 screws at the 2nd, 3rd, 4th
and 5th hole in from support column.
See Step 12 for rear door installation.
●●
●●
●
7839 Front Column (2) 7839 Front Column (2)
7839 Front Column (2) 7839 Front Column (2)
7839 Front Column (2)
●●
●●
●
7834 Right Front Frame (1) 7834 Right Front Frame (1)
7834 Right Front Frame (1) 7834 Right Front Frame (1)
7834 Right Front Frame (1)
●●
●●
●
7835 Left Front Frame (1) 7835 Left Front Frame (1)
7835 Left Front Frame (1) 7835 Left Front Frame (1)
7835 Left Front Frame (1)
●●
●●
●
7831 Lintel (1) 7831 Lintel (1)
7831 Lintel (1) 7831 Lintel (1)
7831 Lintel (1)
7958
IF YOU ARE BUILDING A 12x24
Repeat side top angle assembly using 2
additional angles 7915.
IF YOU ARE BUILDING A 12x31
Repeat side top angle assembly using 4
additional angles 7915.
8531
8532
7915
7838
7834
7831
7839
7839
7835
#8Ax5/16" Screw
#10-32 x7/16" Bolt
INSIDE
2 HOLES
STEP
33
33
3
FRONT OF
BUILDING
FACING
INSIDE
STEP
44
44
4
STEP
66
66
6
STEP
55
55
5
STEP
77
77
7
SIDE TOP
ANGLE
LONG
FLANGE
SHORT
FLANGE
TRACK
INSIDE
2 HOLES