Outdoor Storage User Manual

The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
1 1
1 1
1 Fasten
front columnsfront columns
front columnsfront columns
front columns to the bot-
tom and mid front frames with bolts
and nuts. Flange with 2 holes at each
end must be facing outside. Fold
front panel slightly away from column
to tighten bolts and nuts.
2 2
2 2
2 Fasten
rightright
rightright
right and
left front frameleft front frame
left front frameleft front frame
left front frame
to the top of front wall panels using 4
screws.
3 3
3 3
3 Position
lintellintel
lintellintel
lintel across top of frames
and columns and fasten with bolts.
Step 9Step 9
Step 9Step 9
Step 9
BW22
● Parts Needed For ●
Frames 12x10Frames 12x10
Frames 12x10Frames 12x10
Frames 12x10
22
INSIDE
STEP
55
55
5
STEP
11
11
1
●●
●●
●
7839 Front Column (2) 7839 Front Column (2)
7839 Front Column (2) 7839 Front Column (2)
7839 Front Column (2)
●●
●●
●
7834 Right Front Frame (1) 7834 Right Front Frame (1)
7834 Right Front Frame (1) 7834 Right Front Frame (1)
7834 Right Front Frame (1)
●●
●●
●
7835 Left Front Frame (1) 7835 Left Front Frame (1)
7835 Left Front Frame (1) 7835 Left Front Frame (1)
7835 Left Front Frame (1)
●●
●●
●
7831 Lintel (1) 7831 Lintel (1)
7831 Lintel (1) 7831 Lintel (1)
7831 Lintel (1)
●●
●●
●
Rear Frame Assembly (1) Rear Frame Assembly (1)
Rear Frame Assembly (1) Rear Frame Assembly (1)
Rear Frame Assembly (1)
●●
●●
●
7838 Side Top Angle (2) 7838 Side Top Angle (2)
7838 Side Top Angle (2) 7838 Side Top Angle (2)
7838 Side Top Angle (2)
●●
●●
●
7958 Door Track (1) 7958 Door Track (1)
7958 Door Track (1) 7958 Door Track (1)
7958 Door Track (1)
7835
STEP
22
22
2
4 4
4 4
4 Position
rear frame assemblyrear frame assembly
rear frame assemblyrear frame assembly
rear frame assembly
across top of main wall panels and
fasten using screws.
5 5
5 5
5 Fasten
side top anglesside top angles
side top anglesside top angles
side top angles to the
corner panels using screws. Fasten
support column to top angle using a
bolt.
6 6
6 6
6 Position
door trackdoor track
door trackdoor track
door track to the inside of
side top angle, butted up against sup-
port column. With short flange of
track at bottom, fasten angle to track
using 4 screws at the 2nd, 3rd, 4th
and 5th hole in from support column.
See Step 12 for rear door installation.
8532
8531
79587834
2 HOLES
SIDE TOP
ANGLE
SHORT
FLANGE
LONG
FLANGE
STEP
66
66
6
STEP
44
44
4
#8Ax5/16" Screw
7838
#10-32 Square Nut
7831
TRACK
INSIDE
2 HOLES
FRONT OF
BUILDING
FACING
INSIDE
#10-32x7/16" Bolt
7839
STEP
33
33
3
7839