Product Manual

ManualsBrandsArrow Storage Buildings ManualsMetal Sheds + Storage BuildingsArrow Sheridan Storage Building — 10ft. x 14ft.

● Parts Needed For ●

Roof Beam/Braces

Step 13

SO26hw

●●

●●

● Main Roof Beam Assembly (1)

●●

●●

● 6227 Roof Beam Brace (2)

26

1 Fasten the track supports to the

front gable assembly only, as shown.

2 Wrap the weather stripping tape

around the two joined edges of the

large left and right gables. See dia-

gram. Cut the weather stripping to

length and repeat on next gable set.

3 Spread the two halves of the double

roof beam and fasten to the gable

brace of the front gable.

STEP

6

STEP

2

Roof Beam Brace 6227

STEP

7

10386 Roof Beam (Double)

4 Fasten the other end of the double

roof beam to the gable brace of the

rear gable.

5 Fasten a roof beam brace to the

double roof beam behind the front

gable by placing the tab on the end of

the brace

between

the roof beams.

Align the tab with the

second

hole

and fasten the brace with a bolt and

nut.

6 Fasten the lower end of the roof

beam brace to the track support

with a bolt and nut.

7 Fasten a roof beam brace be-

tween the rear gable and the roof

beam at the first hole, as shown.

STEP

5

STEP

4

STEP

3

Spread Two Halves

Of Roof Beams

STEP

1

Track Supports 6228

Weather Stripping

Roof Beam Brace 6227

(4) (9)