Product Manual

38
You will need for this page:
Step 16: Continued
Finish weather stripping the roof and cut the tape
just past the end of the roof. Fold end of tape
under roof edge.
9
7
Install two roof panels, the left roof panel, ridge
cap and right roof panel on the front of the roof
as before.
Continue to apply weather stripping.
(QTY: 72)
(QTY: 20)
8
Fasten the lower end of the panels to the side wall
angles using screws and washers.
38BP
9087
1
9086
1 2
7743
1
6869
6869
9087
7743
7743
9086
Cut Weather
Stripping and
Fold Under
9087
Ridge Cap
Roof Panel
Right Roof
Panel
Left Roof
Panel
39
Roof Trim Caps are positioned as shown.
Tuck Flange Inward to Fit Inside of Roof
Trim Cap
You will need for this page:
Step 17: Roof Trim
Slide Peak Cap legs under Ridge Cap and secure
with two (2) bolts and nuts.
1
3
Position the Roof Trim Caps as shown below
and secure with a screw.
2
Position Roof Trim as shown below and secure
with screws. Do not fasten the last screw on
each end. Pay close attention to where the Left
and Right Roof Trim pieces are located.
Side Trim
2
6014
Side Trim
4
6015
Trim Cap (L)
2
Trim Cap (R)
2
Peak Cap
2
(QTY: 8)
(QTY: 4)
6014
6014
6015
Side Roof Trim
6015
(QTY: 4)
39BP
6015
6015
Peak Cap