Product Manual

36
Left Roof
Panel
1
9087
Roof Panel
2
7743
Weather stripping tape should be applied in one
continuous strip along the length of the roof.
You will need for this page:
(QTY: 6)
(QTY: 32)
Step 16: Roof Assembly
Install a left roof panel at the left rear corner of
the roof.
1
3
Cover the joint at the peak with weather stripping
tape. Unroll the tape and press it down over the
opening at the ridge as you install each roof panel.
Do not cut the tape until entire roof is completed.
2
Install two roof panels in the sequence shown on
previous page. Follow fastener sequence while
fastening roof panels.
9087
7743
36BP
4
Install one ridge cap on the roof section using
bolts and nuts.
5
Fasten the roof panel ribs, peak cap and ridge
cap together using bolts and nuts.
Narrow roof panel rib (with bead on it) is always
overlapped by wide rib of adjacent panel.
DO NOT FASTEN AT THIS TIME
FASTEN TO NEXT PANEL WITH BOLT AND NUT
FASTEN TO ROOF BEAMS WITH SCREWS
FASTEN TO RIDGE CAP (NEXT TWO PAGES)
Ridge Cap
1
6869
7743
6869
7743