Product Manual

24
9194
Notched edge
must face center
of building.
(QTY: 8)
You will need for this page:
Step 7: Splice Post/Door Jamb
2
Fasten side splice posts to the sides of building using screws. Angled end
of posts must be on top.
Position splice post at the center of the rear wall and fasten using nuts and bolts
into rear wall angle and screws into rear fl oor frame.
1
24BP
3
Fasten the top of the door jambs to the door track with two screws.
Do the same for the bottom into frame. Notched edge faces toward
center of building.
The door jambs reinforce the door opening and provide an attractive trim. The splice posts support the walls.
(QTY: 10)
Hint: Measure or count holes to determine if post is centered on rear.
Angled end of
splice must be
on top.
Splice Post
1
9195
Side Splice
Post
2
9198
Door Jamb
2
9194
9195
9198
9194
9198
(QTY: 2)