Product Manual

17
BUILD TWO (2)
CHECK THAT ALL ASSEMBLED PARTS ARE
THE CORRECT LENGTH BEFORE CONTINUING
Finished Length
89 7/8” 228,3 cm
Place bolt and nut thru second hole from end only.
Slide parts together until four (4) holes align.
You will need for this page:
Step 2: Continued
Overlap two (2) Side Wall Channels so that
three (3) holes align as shown. Insert a bolt
and nut through the center hole. Check that the
fi nished length of the Assembly is 89 7/8” ( 228,3 cm)
set aside for use in Step 10.
2
3
Repeat Part 2 to build a second set.
10394
Side Wall Angle
4
(QTY: 2)
7 5/8” 19,4 cm
Overlap Length
17BP
10394