ARA102696 ARrma Typhon 3S BLX Manual
CONTROLLER OFF SECOND
ESC Specications
Input Voltage
2S-3S LiPo (7.4-11.1v) 35C 5000mAh Minimum
Req. 6-8 Cell NiMh (7.2v-9.6v)
BEC Output 6.0v/6A Max
Only use fully charged LiPo batteries (4.2V per cell) to prevent
battery/ESC damage.
Throt tle
Setup
Connect batteries, turn on TX and press/hold the set button ‘A’. Turn the switch on
‘B’ and release the set button when the RED light ashes on the ESC.
Electronic Speed Controller (ESC)
EC5 Battery Plug
HEAT-SINK MAY BE
HOT AFTER USE
Receiver Plug (CH2)
Power Switch & Set button
Motor wires x 3
1. TX in neutral - press set
button (1 Green ash)
2. TX full throttle - press set
button (2 Green ashes)
3. TX full brake - press set
button (3 Green ashes)
4. Switch o ESC to complete setup
A
B
11