1/10 KRATON 4X4 4S V2 Instruction Manual

WWW.ARRMA-RC.COM
Connect a fully charged battery
pack to the ESC.
Power on the ESC. press the
bind button three times quickly
(within 1.5 seconds of the first
button press).
x3
Set the trims and control positions at the desired failsafe
settings, and power ON the SLT3 transmitter.
Press and hold the bind button
on the receiver.
Power on the receiver. The
orange LED flashes, indicating
the receiver is in bind mode.
Release the bind button after
the orange LED illuminates.
Put your DSMR transmitter (not included) in bind mode.
The bind process is complete when the orange LED on
the receiver remains lit.
DSMR Radio (not included)
Connect a fully charged battery
pack to the ESC.
HOLD
21