1/10 BOOST MEGA 4X2 Instruction Manual

WWW.ARRMA-RC.COM
Insert the Bind Plug in the
EXT RX & BIND Socket on
the ESC.
Connect a fully charged battery
pack to the ESC.
Power on the ESC. The Status
LED will double flash repeatedly,
indicating the ESC is in bind mode.
Center the ST TRIM dial on
the transmitter.
Power the transmitter on. The ESC Status LED will stop
flashing and remain solidly lit.
Remove the Bind Plug, then power off the ESC to save the settings. Power off the transmitter.
Bind socket
Bind socket
22