User's Manual

Specifications
RF Specifications
Uplink Downlink
Frequency Range
824-849 MHz 869-894 MHz
Maximum Output Power
1
+ 20dBm +15dBm
Maximum Gain
60 dB 60 dB
Maximum Allowable
Antenna Gain
18 dBi 9 dBi
Poor Isolation Detection &
Warning Indicator
If re-generative feedback between indoor and outdoor
antennae is detected, condition will be indicated with an
amber LED indicator
Maximum Possible
Exposure (MPE)
Human exposure to non-ionizing radiation meets or exceeds
the permissible FCC mandated MPE specification
1
The RF output power specification is for a multi-carrier environment of up to 3 simultaneous TDMA carriers or 1 CDMA
Carrier
General Specifications
Power Requirements
12V DC, 0.5 Amp typical, 1.0 Amp max
Remote Alarm Output
An open collector output, third pin in the power connector. Contact
rating: 12V, 200mA. Pin is at ground potential on fault condition.
Operating
Temperature Range
-40 to +60°C (-40 to 128°F), indoor use only
Dimensions
161mm L x 152mm W x 33mm H (6.38” L x 5.98” W x 1.30” H)
without RF connectors