User's Manual

Specifications
RF Specifications
Uplink Downlink
Frequency Range
824-849 MHz 869-894 MHz
Maximum Output Power
1
+ 20dBm +15dBm
Maximum Gain
60 dB 60 dB
Poor Isolation Detection &
Warning Indicator
If re-generative feedback between indoor and outdoor
antennae is detected, condition will be indicated with an
amber LED indicator
Maximum Possible
Exposure (MPE)
Human exposure to non-ionizing radiation meets or exceeds
the permissible FCC mandated MPE specification
1
The RF output power specification is for a multi-carrier environment of up to 3 simultaneous TDMA carriers or 1 CDMA
Carrier
General Specifications
Power Requirements
120V AC adapter included
Remote Alarm Output
An open collector output, third pin in the power connector. Contact
rating: 12V, 200mA. Sense: ground potential on fault condition.
Operating
Temperature Range
-40 to +60°C (-40 to 128°F), indoor use only
Dimensions
161mm L x 152mm W x 33mm H (6.38” L x 5.98” W x 1.30” H)
without RF connectors
Net Weight
1.5 kg (3.2 lbs)
RF Connectors
TNC Female
Subscriber Antenna
Customer Supplied
Donor Antenna1
Customer Supplied
Included Accessories
2
120V AC adapter, the adapter complies to UL and CSA safety
standards
Optional Accessories
Power Inserter