Installation Manual

SG800 Signal Amplifier Installation Manual
Page 2 of 2
Copyright 2002, Seamless Group, Inc., All rights reserved.
Rev A D00000413
Made in North America
Installation Cautions
Ñ Use caution to avoid drilling through or near fuel lines or fuel tanks; brake lines; or electrical wiring.
Ñ Do not mount the signal amplifier or its associated wiring in a location that may interfere with the safe operation of the
vehicle.
Installation Of The Signal Amplifier
Signal Amplifier
1.5 M
Cable
Color/ Black
Black
(12 V DC)
Antenna *
1
Antenna
Cable *
1
*
1
Optional items must be purchased separately
.
Phone/Cradle or RF
output device *
1
1
2
3
Signal Amplifier
1.5 M
Cable
Color/ Black
Black
(12 V DC)
Antenna *
1
Antenna
Cable *
1
*
1
Optional items must be purchased separately
.
Phone/Cradle or RF
output device *
1
1
2
3
Typical Installation For Under The Seat Mounting
1. For safety, disconnect the vehicle’s negative “-“ battery terminal to remove power from the vehicle.
2. Drill holes and mount the signal amplifier (ITEM 1) in the selected location.
3. Connect the coloured striped black wire of the supplied 2 Meter (78”) power cable (ITEM 3) for the signal amplifier to a positive
connection on the vehicle’s electrical system. Choose a 10 to 30 Volt DC circuit that is: fuse protected; and ignition switched.
(Often referred to as the “Accessory output”)
4. Attach the solid black wire of the supplied 2 Meter (78”) power cable (ITEM 3) to a vehicle electrical ground point.
5. Attach one end of the antenna cable*
1
to the antenna. The other end is connected to the cellular phone handset via a cradle or an
RF output cable
*1
to the signal amplifier’s ANTENNA output connector. Use the supplied FME to TNC adapters (ITEM 4 or 5) if
necessary.
6. Connect the amplifier’s PHONE input connector to the cellular phone handset via a cradle or an RF output cable using the
provided 1.5 Meter (59”) RF cable (ITEM 2) and adapter (ITEM 4 or 5) if necessary.
7. Reconnect the vehicle’s negative “-“ Battery terminal.
Limited Warranty
Seamless Group Inc. warrants that this product is free from any defects in material or workmanship for a period of one year. If a defect
in material or workmanship is found, Seamless Group Inc. agrees to repair or replace the product at its own discretion, free of charge to
the original purchaser. Please return the product along with proof of purchase to the original authorized dealer. This warranty is null and
void if the product has been modified, abused, tampered with, subjected to abnormal conditions, or transferred to someone other than
the original purchaser.
All brands and trademarks are the property of their respective owners. Designed and manufactured in North America