User`s guide

Touchstone® WTM552 Telephony Modem User’s Guide 31
Getting Battery Wireless Ethernet
Safety Started Installation Installation Configuration Configuration Usage Troubleshooting Glossary
Setting Up Your WAN Connection
Follow these steps to set up your WAN connection.
1 Click the WAN Setup link in the navigation menu, then click Connection
Type.
The Connection Type screen appears:
2 Choose the correct connection type in the Connection Type screen. Most ca-
ble companies require the Dynamic connection type. If your cable company
requires a different connection type, you should have an information sheet
that shows the proper connection type to select and other information need-
ed to set up the connection.
3 Click the Next button at the bottom of the screen (you may have to scroll
down in the browser to see the Next button). The Telephony Modem displays
a screen showing further settings for your connection type. Follow the ap-
propriate link for your connection type:
Jump directly to one of the following topics:
• Configuration Basics
• Accessing the Configuration Interface
• Configuring System Settings
• Setting Up Your WAN Connection
— Dynamic
— Static
— PPPoE
— PPTP
— Telstra BigPond
— L2TP
• Setting the MAC Address
• Setting Up DNS
• Configuring the LAN Channel and Name
• Configuring Wireless Security
• Configuring the Firewall
— Configuring Virtual Servers
— Configuring Client IP Filters
— Configuring MAC Address Filtering
— Configuring the DMZ
• Configuring DDNS
• Configuring Wireless Bridging