User`s guide

Touchstone® WTM552 Telephony Modem User’s Guide 26
Getting Battery Wireless Ethernet
Safety Started Installation Installation Configuration Configuration Usage Troubleshooting Glossary
Configuring Your Wireless Connection
The WTM552 ships with a basic factory default configuration that should allow you
to immediately access the Internet with a wireless connection. If your computer is
equipped with a 802.11b/g wireless LAN card, you may wish to configure the
WTM552 wireless settings. At a minimum, ARRIS suggests that you configure se-
curity settings.
Requirements
Make sure you have the following before attempting to configure your Ethernet
connection:
• Computer with:
— Ethernet interface or wireless interface
— Ethernet cable, if using Ethernet interface (supplied)
•Web browser
Jump directly to one of the following topics:
• Configuration Basics
• Accessing the Configuration Interface
• Configuring System Settings
• Setting Up Your WAN Connection
• Setting the MAC Address
• Setting Up DNS
• Configuring the LAN Channel and Name
• Configuring Wireless Security
• Configuring the Firewall
— Configuring Virtual Servers
— Configuring Client IP Filters
— Configuring MAC Address Filtering
— Configuring the DMZ
• Configuring DDNS
• Configuring Wireless Bridging