User`s guide

ARRIS Router Setup – Web GUI User’s Guide
Page 42 of 92 January 2012
6.2 WAN SETUP – Static IP Connection Type
A static IP address connection type is less common than others and uses a permanent IP address
to connect to the Internet. If your Internet Service Provider gives you an IP address that never
changes, then use this option. For changes to take effect, you must click the Apply button.
Static IP Settings:
Enable Static IP - Click this checkbox to enable a static IP address connection for your system.
IP Address – Enter the IP address assigned by your ISP or static IP operation.
Subnet Mask – Enter the subnet mask assigned for your device by your ISP or static IP operation.
Gateway Address – Enter the gateway address assigned for your device by your ISP or static IP
operation.
Primary DNS Server IP – Enter the IP address of the primary DNS server. Your ISP will provide
this information.
Secondary DNS Server IP Enter the IP address of the secondary DNS server. Your ISP will provide
this information.
Domain Name – The entry here will be displayed as the domain name on your client devices. It
can be specified by your ISP or by you.