User`s guide

ARRIS Router Setup – Web GUI User’s Guide
Page 24 of 92 January 2012
5. Enter the following parameters in the dialog box.
Description – Enter a name for the port trigger.
Inbound Port – Enter the inbound port range for the port trigger. It should be the same
range as the target port.
Format – Sets the format for the port. Options are TCP, UDP, or BOTH.
Target Port – Enter the target port range for the port trigger. It should be the same range as
the inbound port.
6. Click the Add Port Trigger button to add the port trigger.
Note: To delete a port trigger, first select a port trigger in the list and then click the
Delete button.
3.13 Firewall – Configuring Client IP Filters
The router can be configured to restrict access to the Internet, email, or other network services
at specific days and times.
Perform the following steps to add a client IP filter.
1. Access and log into the configuration interface.
2. Click the Firewall tab.
3. Click Client IP Filters in the side menu to display the Client IP Filter Configuration screen.
4. Check the Add button to display the Add Client IP Filter dialog box.
5. Enter the following parameters in the dialog box.
Client IP Address – Enter the IP address of the client.
Port – Enter the outbound traffic port number range, starting and ending.
Type – Sets the port type. Options are TCP, UDP, or BOTH.
Day – Sets the start day and end day for the allowed access. Click the checkbox for All
Week.
Time – Sets the start time and end time for the allowed access during the specified days (24-
hour clock). 00:00 to 24:00 indicates all day, or click the checkbox for All Day.