User`s guide

Home Prev Next WBM650 Wideband Modem User’s Guide 13
Safety Getting Started Installation Usage Troubleshooting Glossary
Front Panel
The front of the Wideband Modem has the following indicators and controls:
A Power : blinks when the Wideband Modem is setting up; on steadily when
ready for use.
B DS : blinks when connecting to the cable system; on steadily otherwise.
C US : blinks when sending data on the cable system; on steadily otherwise.
D Online : blinks when the Wideband Modem is registering with the network;
on steadily when connected to the Internet; off when disconnected from the
Internet.
E Link : flickers when sending or receiving data to the PC over the Ethernet
connection; on steadily otherwise.
F System : on when the Wideband Modem can bridge data between the net-
work and the attached CPE; off when the Wideband Modem is not ready to
bridge data; blinks when the Wideband Modem cannot bridge data due to a
system error.
Wideband Modem Front Panel
A
B
C
D
E
F