User`s guide

Cable Modem Start Up Sequence
The following table shows the start-up sequence for the cable modem portion of the
Telephony Modem. Indicator color is not important.
Using the Reset Button
Use the Reset button, on the back of the Telephony Modem, to reset the modem
as if you power cycled the unit. You may need to reset the Telephony Modem if you
are having problems connecting to the Internet. Using this button will be rare.
Use a pointed non-metallic object to press this button. The photo to the left shows
the location of the Reset button. The Reset button is recessed to prevent acci-
dental resets.
Model TM822S only: The rear panel power switch can also be used to power cycle
the unit.
DS US Online Description
Flash Off Off Downstream search
On Flash Off Downstream found; upstream search
On On Flash
Downstream and Upstream found;
retrieving setup information from cable
operator
On On On Ready for service
Touchstone TM822 Telephony Modem User’s Guide
Safety
Getting
Started Installation
Ethernet
Configuration Usage Troubleshooting Glossary
35
Reset
Tel 2Tel 1
Ethernet
10/100/1000
Cable
TM822A
Reset
Tel 2Tel 1
Ethernet
10/100/1000
Cable
TM822S
Reset
Button
Power
Switch