User`s guide

Touchstone TM401 Telephony Modem User’s Guide 34
Safety Getting Started Installation Ethernet Configuration Usage Troubleshooting Glossary
Using the Standby Button
The Telephony Modem has a Standby button on top of the unit. Press the Standby
button to switch between:
• Inactive (normal) mode: the Ethernet interface is connected to the Inter-
net. The Online light stays on to indicate normal mode.
• Active (standby) mode: the Ethernet interface is disconnected from the
Internet. Computers connected to the Ethernet interface can still communi-
cate with each other, but not with the Internet. The Online light blinks to
indicate active mode.
The Telephony Modem remembers the standby setting when you reset the Telepho-
ny Modem or turn it off. The Standby button does not affect telephony service; te-
lephony service will work regardless of the status of the internet connection.
The Standby button has no effect while the Power light is blinking.
Standby button
TM401