User`s guide

43
Safety
Getting
Started Installation
Ethernet
Configuration Usage Troubleshooting Glossary
Touchstone TG952 Telephony Gateway User’s Guide
Indicator Lights for the TG952
The Touchstone Telephony Gateway has eight LED indicator lights to assist in trou-
ble shooting.
Wiring Problems
If the Telephony Gateway begins flashing all its lights for more than 10 seconds, this
indicates a problem with the telephone wiring — the red and green wires may be
shorted (touching), or there may be undesired voltage on the lines. If this pattern
persists for more than 10 seconds, disconnect the telephone lines from the Tele-
phony Gateway, then call a wiring technician for assistance.
Patterns: Normal Operation (LAN and Telephone)
The following table shows light patterns for the Ethernet and wireless LANs, and the
telephones, during normal operation.
Mode LAN WLAN Tel 1 / Tel 2
AC Power
On = Computer
Connected
Off = Computer
not connected
Flash = Com-
puter Activity
On = WiFi
Enabled
Off = WiFi
Disabled
Flash =
Computer Activity
On = On-hook
Flash = Off-hook
Off = disabled
No AC Power Off Off
On = On-hook
Flash = Off-hook
Off = disabled
Firmware Upgrade (normal operation) (normal operation) (normal operation)
TG952
Power
LAN
DS
US
Online
WLAN
Tel 1
Tel 2
Power
DS
US
Online
LAN
WLAN
Tel 1
Tel 2