User`s guide

Home Prev Next Touchstone CM300 Cable Modem User’s Guide 18
Safety Getting Started Installation USB Drivers Usage Troubleshooting Specifications Glossary
Installing USB Drivers on Windows 2000
Follow these steps to install USB drivers on Windows 2000.
1 Make sure the Cable Modem is on (the Power light should be on). If not,
connect the AC adapter as described in Connecting the Cable Modem.
2 Insert the CD that came with the Cable Modem package into the CD-ROM
drive.
3 Plug the appropriate end of the USB cable into the Cable Modem and the
other end into the computer’s USB port.
The following window appears, indicating that the PC has detected a new
USB device:
4 Wait for the system to start the installation wizard and display the following
window (there may be a short delay):