Installation guide

Installing the TelephonyModem 11
Rack-Mounting the TelephonyModem
Use this procedure to mount the TelephonyModem in a 19-inch rack. For
wall-mounting, see ‘‘Wall-Mounting the TelephonyModem’’onpage 9.
Required Tools
To rack-mount the TelephonyModem, you need:
•#2and #1 Phillips screwdrivers
•The optional rack-mounting bracket kit, part number 729864.
•Four screws to attach the unit to the rack.
Action
Followthese steps to rack-mount the TelephonyModem.
1Install one rack mounting bracket on each side of the Telephony
Modem so that the smooth side contacts the enclosure and the brack-
ets protrude awayfrom the front edge of the unit as shown below.
Use four screws to fasten each bracket to the TelephonyModem.
2Mount the TelephonyModem in the rack and secure it using two
screws on each side.
TM608 Installation Guide Release 6 Standard 1.0 December 2008