Installation guide

Installing the TelephonyModem 7
Preparing the TelephonyModem
Before installing the TelephonyModem, use this procedure to install required
and optional accessories.
Requirements
Youneed the following items to attach an adaptor:
•RJ-14/RJ-11 adaptor,RJ-21X adaptor,orIDC Rocker adaptor
•Two screws (included with the adaptor)
•Small flat-blade screwdriver
Action
Perform the following tasks as needed.
Task Pag e
Attaching the Adaptor 7
Installing a Battery 8
Attaching the
Adaptor
The TM608 uses one of three adaptors to attach telephone lines. Follow
these steps to attach the adaptor.
1Ifanadaptor different from the required adaptor is already attached to
the TM608, remove the twoscrews and remove the adaptor from the
back of the TM608.
2Align the pins on the adaptor with the sockets on the Telephony
Modem, and orient the label on the adapter with the top of the Tele-
phonyModem, and push the adaptor into place.
3Secure the adaptor using the twoscrews included with the adaptor.
TM608 Installation Guide Release 6 Standard 1.0 December 2008