QU IC K STA RT GUI DE Cable Modem with Xfinity Voice T25
What’s in the Box 12vDC 2.
Introduction 1 Status Indicators 4 2 Let’s Get Started 7 3 Cable Modem Web Manager 14 3
Status Indicators 1 4
Front Panel LEDs Power On Power is properly connected to the voice cable modem US/DS On Upstream (Send data) and Downstream (Receive data) channels are connected Online On Voice cable modem is connected to the network Tel1 & Tel2 Flash Telephone service for lines 1 & 2 are connected. Note: Detailed LED status information is available online in the SURFboard T25 User Guide at the ARRIS Support website, www.arris.com/selfhelp.
The SURFboard T25 is a combination DOCSIS 3.0 telephony cable modem with two Voice-over-IP (VoIP) telephone lines. It uses DOCSIS 3.0 technology to provide ultra high-speed Internet access on your home or small business network. For whole home connectivity, use the T25 Ethernet port to add a Wi-Fi router (separate purchase). Using the connection capabilities of the T25, you can connect your computer and other network-enabled devices via the two Ethernet ports.
Let’s Get Started 2 7
A Connect the coaxial cable (not included) from the cable wall outlet or RF splitter to the Cable connector on the rear of your cable modem. Tighten the cable connector by hand.
B Connect the Ethernet cable to Ethernet port 1 on the rear of your cable modem and the Ethernet port on your PC or laptop. Ethernet port 2 is bridged to Ethernet port 1. Your Internet service provider may require a subscription to a second IP address to support using both Ethernet ports.
C Connect the power adapter to the Power port on the rear of your cable modem, then plug it into an electrical wall outlet that is not controlled by a wall switch. Your cable modem will automatically power ON when the power adapter is connected.
D Check the front panel LEDs on your cable modem. After a brief pause, the first three LEDs should light up SOLID white.
Make sure you have the cable modem model name (T25), HFC MAC ID, and Serial Number (S/N) listed on the modem label located on the bottom of your cable modem or attached in the Cable Modem Label section at the end of this document. Note: For Comcast subscribers, please visit xfinity.com/activate before calling Comcast or ARRIS. If there is an issue with the activation, please call Comcast: 1-800-Xfinity (1-800-934-6489).
E Open a web browser using your mobile device and visit xfinity.com/activate to activate your Xfinity service. Activate your Xfinity service using either your mobile phone number or your Xfinity user name and password.
E Verify T25 connectivity by accessing the Internet on your connected PC or laptop. Visit any public webpage such as www.surfboard.com. If the website fails to open, please contact your service provider to set up your Internet service or activate your cable modem.
Cable Modem Web Manager 3 17
A Monitor the T25 operational status using the T25 Web Manager. Open a web browser (e.g., Internet Explorer, Google Chrome, etc.) on your connected computer or laptop. Type the default LAN IP address, 192.168.100.1 in the Address bar and press Enter.
B For additional assistance with your T25, ARRIS is available to help. Choose one of the following: • Visit www.arris.com/selfhelp for Self Help, FAQs, Product Manuals, Live Chat, and Email support. • Call us at 1-877-466-8646. • For information on additional SURFboard products, including www.surfboard.com.
Cable Modem Label If the cable modem label is not attached, please check the bottom of your T25. © 2018 ARRIS Enterprises, LLC. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without written permission from ARRIS Enterprises, LLC. ARRIS, SURFboard, and the ARRIS logo are all trademarks or registered trademarks of ARRIS Enterprises, LLC.
