QU IC K STA RT GUI DE Wi-Fi Cable Modem SBG8300
What’s in the Box Power Adapter Support Information Card Ethernet Cable Software License & Warranty Card SBG8300 Wi-Fi Cable Modem 2 SBG8300 Quick Start Guide
Introduction 1 Status Indicators 4 2 Let’s Get Started 7 3 Set Up Your Wi-Fi Network Connection 14 3.1 Download ARRIS SURFboard® Manager 3.
Status Indicators 1 4
Front Panel LEDs Blue (Solid) - Power is connected Online Blue (Slow Blink) - Acquiring downstream connection Blue (Fast Blink) - Acquiring upstream connection Green (Solid) - IP Link/Online Blue & Green (Alternating) Firmware download Wi-Fi Green (Solid) - Clients found (5 GHz or dual-band) Green (Slow Blink) - No clients found (5 GHz or dual-band) Blue (Slow Blink) - No clients found (2.
The SBG8300 is a combination DOCSIS 3.1 cable modem and four-port Ethernet router with Wi‑Fi. It uses DOCSIS 3.1 technology to provide ultra high-speed Internet access on your Wi-Fi home or small business network. Using the connection capabilities of the SBG8300, you can connect your computer and other network-enabled devices via the four Ethernet ports or the 2.4 GHz and 5 Ghz Wi-Fi connections. The SBG8300 connects to the existing coaxial cable connection in your home.
Let’s Get Started 2 7
A Connect the coaxial cable (not included) from the cable wall outlet or RF splitter to the Cable connector on the rear of your SBG8300. Tighten the connector by hand.
B Connect the Ethernet cable to any Ethernet port on the rear of your SBG8300 and the Ethernet port on your PC or laptop.
C Connect the power adapter to the Power port on the rear of your SBG8300, then plug it into an electrical wall outlet that is not controlled by a wall switch. Your SBG8300 will automatically power ON when the power adapter is connected.
D Check the front panel LEDs on your SBG8300. After a brief pause, both LEDs should light up SOLID green.
Make sure you have the Wi-Fi cable modem model name (SBG8300), HFC MAC ID, and Serial Number (S/N) listed on the Wi-Fi cable modem label located on the bottom of your SBG8300 or attached in the Wi-Fi Cable Modem Label section at the end of this document. Note: For Comcast subscribers, please visit xfinity.com/activate before calling Comcast or ARRIS. If there is an issue with the activation, please call Comcast: 1-800-Xfinity (1-800-934-6489).
E Verify SBG8300 connectivity by accessing the Internet using the connected PC or laptop. Visit any public web page such as www.surfboard.com. If the website fails to open, please contact your service provider to set up your Internet service or activate your SBG8300.
Set Up Your Wi-Fi Network Connection 3 Choose one of the following options: 3.1 Download ARRIS SURFboard® Manager 3.
3.1 Download ARRIS SURFboard® Manager Mobile App Use the ARRIS SURFboard Manager mobile app (see page 16) or the SBG8300 Web Manager (see page 21) to set the same network name and password, if you are replacing the router or Wi-Fi cable modem in an existing Wi-Fi network. This ensures that your Wi-Fi devices will automatically connect to your SBG8300 Wi-Fi network.
A Download the ARRIS SURFboard Manager mobile app from the Apple App Store or Google Play Store. Scan the QR code to download the mobile app on your iOS or Android mobile device: Open the ARRIS SURFboard Manager mobile app and follow the prompts to configure your SBG8300 Wi-Fi network.
3.2 Connect using your mobile device ! Some of the selections used in this procedure may vary slightly depending on your mobile device and operating system. Please make sure to select the most applicable selections on your mobile device.
A Access the Settings screen on your mobile device and then select: Wi-Fi, Wireless, or Connections. Check that Wi-Fi or Wireless is set to ON. For Apple devices, you may have to enter a password and then select JOIN.
B Select the SBG8300 Wi-Fi network from the list of available Wi-Fi networks.
C Enter your Wi-Fi network password in the Password field and select Join or Connect. This is the password that you set up during the SBG8300 activation.
Wi-Fi Cable Modem Web Manager 5 21
A Manage your SBG8300 using the SBG8300 Web Manager. Open a web browser (e.g., Internet Explorer, Google Chrome, etc.) on your connected computer or laptop and then type 192.168.0.1 in the address bar. The default login is case-sensitive. Username: admin Password: password Change the default SBG8300 Web Manager password located on the Gateway > Login screen and then click LOGIN to update your password.
B Customize the default Wi-Fi network name or SSID (SBG8300-####) for your Wi-Fi home network after installing your SBG8300 and setting up your network connection(s). Note: You have the option to either keep the default Wi-Fi network name or create a new network name to help you to easily identify your Wi-Fi home network. For additional assistance with your SBG8300, ARRIS is available to help. Choose one of the following: • Visit www.arris.
Wi-Fi Cable Modem Label If the label is not attached, please check the bottom of your Wi-Fi cable modem. © 2019 ARRIS Enterprises, LLC. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without written permission from ARRIS Enterprises, LLC. ARRIS, SURFboard, and the ARRIS logo are all trademarks or registered trademarks of ARRIS Enterprises, LLC.
