User`s guide

Section 2: Web GUI Screens and Configuration Parameter Reference
May 2012 Page 63 of 95
7.4 LAN Setup – Ports
This page allows the Ethernet ports to be configured. This is an advanced feature and should
not be set unless requested by your service provider.
Select Ethernet Port – Select the Ethernet port to be configured.
Ethernet Port Setup: (Technician Level Only)
Enabled – Click this checkbox to enable the selected port.
Auto – Click this checkbox to enable automatic configuration. When enabled, the port
automatically set its duplex mode and speed.
Duplex – If Auto is not enabled, select the communication mode for the port. Can be set to Full
Duplex or Half Duplex.
Speed – If Auto is not enabled, select the speed for the port. Can be set to 10 Mbps, 100 Mbps,
or 1,000 Mbps.