User`s guide

ARRIS Router Setup – Web GUI User’s Guide
Page 54 of 95 May 2012
6.8 WAN SETUP – Routing (RIPng) (Technician Level Only)
Note: This section does not apply to the Moxi Gateway or Touchstone Model 9xx
Gateways.
This screen allows dynamic routing of IPV6 (RIPng) to be enabled and configured. Only change
these values if your service provider recommends that you do so.
Dynamic Routing (RIPng):
Enable Dynamic Routing – Click this checkbox to enable Dynamic Routing of IPV6 (RIPng) on your
system.
Enabled Routed Subnet (RIPng):
Enabled Routed Subnet – Click this checkbox to enable routed subnet.
Enabled Routed Address – IPV6 address for routed address.
Enabled Routed Subnet Prefix – IPV6 prefix to assign to routed subnet.