User`s guide

Section 1: Configuring Your Router and Your Wireless LAN Connection
May 2012 Page 31 of 95
3.21 Utilities –Restoring your Settings
This function allows you to restore a previously saved router configuration.
Perform the following steps to restore previously saved settings.
1. Access and log into the configuration interface.
2. Click the Utilities tab.
3. Click Restore Settings in the side menu to display the Restore Settings screen.
4. Use the Browse button to locate and select the previously saved backup file.
5. click the Restore Chosen File button to restore your router’s settings.
3.22 Utilities – Using System Logs
3.22.1 Configuring the Logs
The Utilities – Log Configuration screen allows you to set system log event configuration.
Perform the following steps to configure the system logs.
1. Access and log into the configuration interface.
2. Click the Utilities tab.
3. Click Log Configuration in the side menu to display the Log Configuration screen.
4. Enter the following parameters.
Email Alerts – Click this checkbox to enable Email Alerts. Alerts will be sent to the email
address entered in the Contact Email Address field.
Contact Email Address – Enter the email address to which you want email alerts sent.
SMTP Server Address – Enter the SMTP server IP address.
5. Click the Apply button at the bottom of the screen.
3.22.2 Viewing the Logs
The Utilities - System Logs screen displays the system logs.
When viewing the logs, click the Refresh button to update the list. Click the Clear Log button to
clear the list.
3.23 Utilities – DDNS
Note: This section does not apply to the Moxi Gateway.
DDNS (Dynamic DNS) allows you to provide Internet users with a fixed domain name (instead of
an IP address which may periodically change). This allows your gateway and applications set up
in your gateway's virtual servers to be accessed from various locations on the Internet without
knowing your current IP address.