User`s guide

Section 1: Configuring Your Router and Your Wireless LAN Connection
May 2012 Page 29 of 95
5. Configure any or all of the following parental controls:
Trusted MAC Addresses - Enter the MAC addresses of any “trusted” computers on the
network and click the Apply button. Once added, these trusted computers will not be
affected by the parental control settings.
Note: Refer to 3.8.1F inding the MAC Address of a Computer for information on
determining the MAC address of your computer.
Keyword and Web Site Filtering - You can add a list of keywords and web sites that you
want to block. To add a keyword or web site to the list, click the respective Add button. To
delete a keyword or web site from the list, first click its check box and then click the Delete
button.
6. Adding a Keyword or Web Site Filter
a) Enter the keyword in the Keyword field or web site URL address in the Web Site field.
b) Set the start day and end day for the blocked access. (Sun until Sun indicates all week, or
just click the All Week checkbox.)
c) Set the start time and end time during the specified days (24-hour clock). (0:00 until 0:00
indicates all day, or just click the All Day checkbox.)
d) Click the Add Keyword Filter or Add Web Site Filter button respectively. Then click the
Apply button.
3.17 Utilities – Viewing the Network Status
You can view status and system information for your network on the Utilities – Status screen.
Perform the following steps to view system status information.
1. Access and log into the configuration interface.
2. Click the Utilities tab.
3. Click Status in the side menu to display the System Information screen.
Note: Refer to 10.1 Utilities – Status/System Information for an explanation of the
various status information parameters.