User`s guide

Section 1: Configuring Your Router and Your Wireless LAN Connection
May 2012 Page 27 of 95
Type – Sets the port type. Options are TCP, UDP, or BOTH.
Day – Sets the start day and end day for the allowed access. Click the checkbox for All
Week.
Time – Sets the start time and end time for the allowed access during the specified days (24-
hour clock). 00:00 to 24:00 indicates all day, or click the checkbox for All Day.
6. Click the Add Client IP Filter button to add the filter.
Note: To delete a client IP filter, first select aclient IP filter in the list and then click
the Delete button.
3.14 Firewall – Configuring Client IPV6 Filters
Note: This section does not apply to the Moxi Gateway or Touchstone Model 9xx
Gateways.
The router can be configured to restrict access to the Internet, email, or other network services.
Perform the following steps to add a client IPV6 filter.
1. Access and log into the configuration interface.
2. Click the Firewall tab.
3. Click Client IPV6 Filters in the side menu to display the Client IPV6 Filter Configuration
screen.
4. Check the Add button to display the Add Client IP Filter dialog box.
5. Enter the following parameters in the dialog box.
Action – Allow or Deny data watching this filter.
Direction – Watch Incoming our Outgoing data.
Client IP Address – Enter the range of IPV6 addresses to filter.
Port – Enter the outbound traffic port number range, starting and ending.
Type – Sets the port type. Options are TCP, UDP, or BOTH.
6. Click the Add Client IP Filter button to add the filter.