User`s guide

ARRIS Router Setup – Web GUI User’s Guide
Page 10 of 95 May 2012
2. In your web browser, open the page http://192.168.0.1/ to access the wireless router setup.
The Login screen displays.
3. Enter the user name and password and click the Apply button to log in.
Note: The default user name is “admin”. The default password is “password”, in
lower case letters.
Moxi Gateway: The default user name is “admin”. The Moxi Gatway has no default
password. The first access to the web interface will prompt you to create a password
for user “admin”.
The System Basic Setup screen displays.
4. Set basic setup configuration parameters as required for your system.
Note: Most configuration parameters that you may want to set can be accessed on
the System Basic Setup screen, including the security mode and setting a system
password.
2.2 Configuring Your Wireless Network
Perform the following procedures to make the basic configuration settings for your wireless
network.
2.2.1 Enabling or Disabling the Wireless Network
Perform the following steps to enable the wireless network.
1. Access and log into the configuration interface.
2. Click the Basic Setup tab.
3. Click the Enable Wireless checkbox to enable wireless networking.
Moxi Gateway: You must also check the Enable Radio checkbox as well. Wireless
will only work when both boxes are checked.
4. Click the Apply button at the bottom of the screen.
2.2.2 Changing Your Login Password
You should change your login password to something other than the default password.
Note: The default user name is “admin”. The default password is “password”, in lower
case letters.
Perform the following steps to change your password.
1. Access and log into the configuration interface.