User manual

Diagnostics
VMS1100 Hybrid QAM/IP Video Media Server • Installation and Operation Manual
72
365
-095-25654 x.1 This document is uncontrolled pending incorporation in an ARRIS CMS
Table 27 – Interface Status -DVI/HDMI Fields (Page 1 of 2)
FIELD DESCRIPTION
Mode
Indicates the connector mode: DVI or HDMI
Color Space
Indicates the color space used over the HDMI connection:
YCC or RGB
Device Connected
• Indicates whether a device is connected to the HDMI
port: Yes or No.
Video Xmission
Video transmission — Indicates whether the VMS1100 is
transmitting video over the HDMI port
HDCP Enabled
Indicates whether the VMS1100 is using HDCP to encrypt
video transmitted over the HDMI link — Yes or No. If the
Video Xmission status is Not Active, the HDCP Enabled
status is No
Output Format
Indicates the timing format of the video sent through HDMI:
• 1920 x 1080p — 1920 pixels wide by 1080 pixels
high, progressive
• 1920 x 1080i — 1920 pixels wide by 1080 pixels high,
interlaced
• 1280 x 720p — 1280 pixels wide by 720 pixels high,
progressive
• 720 x 480p — 720 pixels wide by 480 pixels high,
progressive
• 720 x 480i — 720 pixels wide by 480 pixels high,
interlaced
• 640 x 480p — 640 pixels wide by 480 pixels high,
progressive
Aspect Ratio
Indicates the aspect ratio of the video sent through HDMI:
4:3 or 16:9.
EDID DATA
Indicates the video timing formats that were read from the
Extended Display Identification Data (EDID) register for the
connected device. In particular, the detailed timing description
blocks. The list displays a selection of common formats that
the TV or repeater supports that have been read by the
Product.
If the Product cannot read any formats, EDID Data is blank.
An asterisk (*) after the aspect ratio means the Product
supports the format.