User manual

Diagnostics
VMS1100 Hybrid QAM/IP Video Media Server • Installation and Operation Manual
52
365
-095-25654 x.1 This document is uncontrolled pending incorporation in an ARRIS CMS
The front panel displays the unit address of the device when the Address/Security screen is displayed, if the
device supports a unit address. See the following examples:
Table 15 – Unit Address Fields (Page 1 of 2)
FIELD DESCRIPTION
CableCARD Inserted YES — CableCARD is inserted
NO — CableCARD is not inserted
Unit Address
A unique decimal number that indicates the unit address
of the CableCARD.
Host Serial Number Displayed on the Unit Address Diagnostic screen.
4 MAC Addresses Installed
The MAC addresses are stored in protected flash and displayed in
hexadecimal.
Table 16 – Separable Security Fields (Page 2 of 2)
FIELD DESCRIPTION
CARD Interface
CableCARD Interface is a status indication of the interface between
the VMS and CableCARD. It will indicate ‘Good’ if no errors were
detected, ‘Error’ if there is a problem detected with establishing the
CableCARD interface, or ‘Unsupported CARD’ if the inserted
CableCARD is not an M-CARD.
CableCARD ID
The unique identifier provided by the CableCARD.
Host ID
The unique identifier in the VMS Device Certificate.
Data ID
A value generated by the CableCARD for the Pairing report.