User manual

Installation
VMS1100 Hybrid QAM/IP Video Media Server • Installation and Operation Manual
37
365
-095-25654 x.1 This document is uncontrolled pending incorporation in an ARRIS CMS
Figure 31 – User Settings Screen
2. Use the remote control or the cursor keys on the front panel to navigate the onscreen menus:
ο Press the ▲ and ▼ keys to highlight the setting you wish to change.
ο Press the ► key to select an option.
ο To exit the setting and move to another setting, press the ▲ or ▼ key.
ο To exit the menu and save your settings, press the Power or Menu key.
3. If the User Setting screen does not display on the HDTV screen, the TV may not support the default video
output setting. Use the front panel display to adjust the settings as described in There is no video on the
TV screen in the Troubleshooting section.
Table 10 – User Settings Fields
SETTINGS DESCRIPTION
TV Type
Allows you to specify the style of television connected to the set-top.
Options include 16:9, 4:3 LETTERBOX, and 4:3 PAN SCAN. By default,
the 16:9 option is selected. The options are used as follows:
• 16:9 designates that a widescreen television is connected to the
set-top.
• 4:3 LETTERBOX designates that a standard screen television is
connected to the VMS set-
top and that widescreen programs should be
scaled to fit the screen with black bars above and below the picture.
• 4:3 PAN SCAN designates that a standard screen television is
connected to the VMS set-
top and that widescreen programs should be
cropped so that the picture fills the entire screen.