User manual

Installation
VMS1100 Hybrid QAM/IP Video Media Server • Installation and Operation Manual
16
365
-095-25654 x.1 This document is uncontrolled pending incorporation in an ARRIS CMS
Connecting to the Optical Network Terminator (ONT)
If necessary, connect to the ONT to the home coaxial network. This example shows connecting the ARRIS
ONT1000 model which does not have embedded Multimedia over Coax Alliance (MoCA) technology.
Make sure the coaxial cabling on the customer premises is not connected to any
digital network or satellite dish.
Determine how to route the coaxial and Ethernet cables from the ONT into the home. You may need to move
an existing cable drop from its present location to where the ONT is mounted.
To connect to the ARRIS ONT1000, do the following:
1. Open the door.
2. Connect the customer’s premises coaxial cable wiring to the
CABLE OUT port.
3. Connect the customer’s premises Ethernet cabling to the
ETHERNET port.
4. If necessary, route the coaxial and Ethernet cables into the house.
5. Close the ONT door and secure the ONT.
Figure 9 – Connecting to the ONT1000