Specification

SBR-AC3200P
• Four Gigabit Ethernet ports for ultra-fast wired connectivity.
• RipCurrent Gigabit Home Networking via power lines, ready to connect to up to 15 extenders to reliably take
your network to the farthest reaches of your environment.
• Two USB ports, one USB 3.0 and one USB 2.0, for data and media storage or transfer, print sharing, and
device charging.
The SBR-AC3200P is an Access Point / Router ready to establish or improve your home or business network.
Using the compelling and aesthetically-designed SBR-AC3200P to connect to your Internet Access Device with
the Gigabit WAN input, you add true Whole Home Networking capability. Distribute internet connectivity and
content throughout your home by connecting your clients to the SBR-AC3200P via one of the three wireless
radios, or via the internal 4-port Gigabit Ethernet switch. Connect the whole home via the embedded
RipCurrent technology using the home electrical wiring and a HomeGrid Network Extender. Connect your
content devices to the network using the USB 3.0 or USB 2.0 ports.
Connecting your SBR-AC3200P is Quick and Easy.
• Find an open AC outlet and connect the power. No need to find space for a clumsy power adapter.
• Connect and Go with a WAN input cable (included) and a LAN output cable (not included).
• Use the Quick Install Wizard accessed with your connected browser to set up your wireless network and
management security.
• Never worry about antenna adjustment again. SURFboard antennas are internal to the device, with
optimized orientation for MIMO arrays. The internal design removes the potential for antenna breakage.
• Use the QR code on the bottom of the unit for Wi-Fi Quick Connect of your Android or Apple devices.
• Use the WPS button on rear of the unit for Wi-Fi connections to WPS enabled devices.
• Use the SURFboard defaults for recommended settings, or customize your advanced settings to your desired
configuration.
• Defaults select the appropriate radio to connect a device to for optimal performance on higher end clients.
Examples:
• 802.11n 1x1 phone connect to SBR-AC3200P 2.4 GHz radio.
• 802.11ac 1x1 tablet connect to SBR-AC3200P 5 GHz Low Band radio.
• 802.11ac 3x3 client connect to SBR-AC3200P 5 GHz High Band radio.
• Client devices with a poor connection move from 802.11ac 5 GHz High Band to Low Band to minimize
impact to other High Band users.
• Connect to the USB ports to attach NAS storage for data or media.
• Plug in RipCurrent Gigabit Home Network extenders at any AC outlet, no new wires needed. More outlets in
the home and outlets in every room for flexible placement of extenders.
• Connect to RipCurrent Extenders with pushbutton pairing.