User manual

Universal Motor Controller UMC-4 – User Manual – V 02/2015 Page 43 of 54
Appendix
Antenna Connector
The radio connection is established via the antenna connected to
the antenna connector. Do not leave the connector open during
operation or transport. The radio module inside could be
damaged by electrostatic discharge via the open connector. We
recommend using the originally supplied antenna only.
Cables and Accessories
The following accessories are compatible with the UMC-4:
K2.0001967
L-Bracket (supplied with UMC-4)
K2.0001758
V-Plate
K2.0002007
Outdoor Antenna (straight) for UMC-4 Motor Controller
(supplied with UMC-4)
K2.0001637
Cable UMC-4 RS IN to RS
K2.0002668
Cable UMC-4 RS IN to D-Tap
K2.0002672
Cable UMC-4 RS IN to PSC (additional PSC cable
required)
K2.0002674
Cable UMC-4 RS IN to open end
K2.0005951
Cable UMC-4 to ALEXA
K2.0001604
Cable UMC-4 to AMIRA (REC start/stop and tally with
AMIRA SUP 1.1 onwards)
K2.0002919
Cable UMC-4 to LANC (additional RS IN cable required)
K2.65205.0
Cable UMC-3/4 to Sony F35/PSC (additional PSC cable
required)
K2.0000321
Cable UMC-3/4 to Sony F55/PSC (additional PSC cable
required)
K2.0002620
Cable UMC-4 to F55 (additional RS IN cable required)
K2.0002656
Cable UMC-4 to F65 (additional RS IN cable required)
K2.65186.0
Cable UMC-3/4 to RED ONE/PSC (additional PSC cable
required)