User manual

Universal Motor Controller UMC-4 – User Manual – V 02/2015 Page 33 of 54
Select Menu>Focus/Zoom Demands>Set Limits.
Press the FOCUS or ZOOM button and start turning the demand’s control
knob to its limits to activate calibration mode. After reaching both limits,
leave the demand still for at least three seconds. The text on the screen will
change from Calibrating… to Calibrated. The calibration is now completed.
Fig. 8: Focus/Zoom Demands Menu
System Menu
The System menu contains a series of submenus that allows you to
configure the UMC-4 to better suit your needs.
Display Menu
The Display menu allows you to set the preferences for the display:
Color Theme offers various color themes for the UMC-4 display.
Display Backlight lets you set the backlight intensity for the LCD screen.
Button Backlight lets you set the backlight intensity for all UMC-4 control
buttons.
Select Enter Sleep After to set the sleep mode timing.
Sleep Mode lets you set whether the sleep mode will apply to only buttons
or display and buttons.