User manual

Universal Motor Controller UMC-4 – User Manual – V 02/2015 Page 29 of 54
Favorites
To add a lens table to the Favorites list, select Add to Favorites from the
Lens menu. This opens the Lens Data Archive including a library of pre-
defined lens tables.
Select a lens type, then a lens model and, in case of Zeiss lenses, a lens
class. The lens class can be found on the lens barrel below the infinity
symbol of the focus scale.
To add the lens table to the Favorites list press ADD; to use it without
adding it to Favorites press USE; or to do both press ADD+USE.
Press REMOVE to delete the currently selected lens table from the
Favorites list. Press REM. ALL to delete all lens tables from the Favorites
list.
Copying Lens Tables from SD Card
Custom lens tables can be added to the Lens Data Archive’s Custom folder
via SD card. To add a new lens table to the UMC-4, place the lens table on
the SD card and insert the SD card into the UMC-4.
Go to Menu>Lens>Copy from SD Card. Navigate the SD card’s file system
until you reach the desired lens table, then press SELECT to select the
specific one lens table or press SEL. ALL to select all lens tables in the SD
card folder. A popup message will appear offering to instantly add the
selected lens table(s) to the favorites list as well. Press YES to add the
table(s) to the Favorites list, press NO to not add the table(s) to the
Favorites list or press CANCEL to cancel the whole operation.
Custom lens tables can be deleted in the Delete Custom Lens Tables
menu.
Note: You can program a custom lens file through the ALEXA web
interface or with the Wireless Compact Unit WCU-4 (SUP 2.0 onwards)