User manual

Page 26 of 54 Universal Motor Controller UMC-4 – User Manual – V 02/2015
Motors Menu
The Motors menu lets you set up the focus, iris and zoom motor, calibrate
motors and select the calibration speed.
Press CAL ALL to calibrate all motors.
Press INFO to get a motor status overview.
Select Low calibration speed for mechanically delicate lenses.
Fig. 3: Motors Menu
Focus, Iris, Zoom Menu
The Focus, Iris and Zoom menu pages allow the setting of motor mounting
side and motor torque.
Side: Select the side on which the motor or lens data encoder is mounted
to the lens.
Torque: Set the torque level for CLM-3 and CLM-4 motors.